Home / Corporate Solutions / Managing stored grain to minimize storage losses

Managing stored grain to minimize storage losses

When grain harvest approaches, it is time to review basic on-farm grain storage principles for maintaining quality of stored commodities. Harvest should include preparation of storage structures to receive grain. Preparation includes several practices that aid in preventing pest infestations from developing within our storage structures.

Multiple practices should be implemented on farm to maximize grain quality. These include using appropriate production and harvest practices, maintenance and proper use of grain handling equipment, drying systems and storage structures. There are four simple steps to maintain post-harvest quality and protect stored grains from insects, weather, rodents, self-heating, molds, mycotoxins, and pesticide residues:

  1. Sanitation
  2. Combining and loading into storage
  3. Aeration
  4. Monitoring


Be sure that the storage structure as well as any grain handling equipment (conveyors, wagons, trucks, elevators) are free of leftover grain. Cleanup is most effective when completed in early spring or immediately after bins are emptied. Unnecessary grain residue present during early summer only allows insect infestations to increase during warming temperatures. Even small amounts of moldy or insect-infested grain left in equipment can contaminate a bin of new grain. Repairs such as sealing cracks and/or holes can be completed simultaneously. Old grain being moved to different storage should be screened and, if infested, treated by fumigating.

Always keep areas clean outside around the bin, beneath perforated floors and inside ducts in addition to cleaning the bin. Debris and grain spills outside the bin encourage rodents and insects which can then move in through openings. Keep weeds from growing around bin areas as these sites are ideal for pests to hide. On the inside, sweep or vacuum grain dust and old grain from floors, walls and ceilings where hiding places exist for stored grain insects. A common rule-of-thumb is, “If you can tell what has previously been in the bin, it is not clean”.

In bins where the perforated floor cannot be easily removed, fumigants containing aluminum phosphide, such as Phosfume2 or Weevil-cide, can be applied to control insects in the sub-floor area. Aluminum phosphide is a highly toxic chemical, and as such, all label instructions and safety measures must be carefully adhered to. To use this product, an applicator must be a certified fumigator. Private pesticide applicators require the fumigation endorsement in order to purchase and use these products.

Roof leaks commonly lead to columns of spoiled grain. Check for these leaks by looking for light coming into the bin. Moisture coming into the bin through the seal between the bin and concrete will cause spoilage around the perimeter of the bin at the base. Check the seal since sealants do deteriorate. Water will run away from the seal at the base of the bin wall if the concrete is sloped away from the bin. Also check the seals around the doors and hatches.

After cleaning and repairing, use a residual bin spray to treat the insect surfaces of the bins at least two weeks prior to filling (see Table 1). It is better to treat during the warmer months when insects are active. If treatments were applied more than three months earlier, an additional treatment should be applied two to three weeks before new grain is placed in the bin.

Combining and loading into storage

Cleaning the grain

Grain harvested with a clean and properly adjusted combine should also be run through a grain cleaner to further remove fine materials on which insects can feed. Grain with many broken kernels can also be run through a cleaner, but this will lead to additional weight loss. Clean, whole grain helps in insect management, but also is important in proper aeration of the grain mass during drying and storage. If fine materials are not present, air drawn into the grain from outside the bin will move more uniformly through the mass. A grain distributor is extremely helpful in preventing aggregations of fine material by spreading it uniformly across the grain mass. When a distributor is not used, the fine material will concentrate in a column at the center of the grain mass. Because this column is more dense, air will move around it through the less dense grain mass, allowing moisture to build up in the center of the bin. Moisture buildup is the first step in grain quality deterioration.

Loading the grain

Loading refers to creating a grain mass with several basic properties that make it easy to handle and that lead to long life. The grain mass should be clean and dry, uniform without foreign material, and stored in an aerated weatherproof structure. Further, plan to protect against stored grain insects by using a grain protectant (see Table 1) if grain is to be held in storage for a year or more.

Specific practices that help approach the ideal grain mass include limiting kernel damage through slow drying methods, limiting the number of times grain must be handled, operating augers and elevators at capacity and slowest possible speeds, and storing grain in aerated structures.

Protecting the grain

If insecticide protectants are going to be applied to the grain, treat the grain stream just before it reaches final storage (Table 1). Grain that is treated and then transferred long distances through numerous grain handling systems (such as pneumatic systems, belt augers, conveyors, spouts, legs, etc.) before storage will have less insecticide residue when the grain is finally loaded into the bin. It is very important to note that in situations where grain drying is necessary, an insecticide protectant should be applied after the grain has gone through the drier and has cooled. Commercial grain driers generate enough heat to rapidly degrade insecticides applied to grain prior to the drying process.

Immediately after the bin is filled and the grain leveled, apply a surface treatment (“top dressing”) of an approved grain protectant. The surface treatment will help control insects that enter the grain through roof openings. Surface treatments alone generally will not keep the grain insect-free, but they can reduce insect populations during the storage period. Surface treatments are effective if the following limitations are understood. Surface treatment will not control an established insect infestation already in stored grain. The surface treatment should not be disturbed, since it provides the protective barrier against insect infestations.


In the fall, aerate to cool the stored grain and create a better storage environment in any bin larger than 2,000 to 3,000 bushel capacity. We should be able to cool grain to temperatures below 50°F by gradually cooling the grain through the fall. Insect activity is reduced at this temperature. Local winter temperatures allow us to achieve a target temperature for stored grain of 25°F for the winter. At this temperature, insect activity ceases and some mortality will occur for a number of our stored insect pests. Keep grain temperature less than 50°F at all times of the year. In the upper Midwest, aerate to cool grain to 20° to 30°F for winter storage.

The grain mass should be cooled and dried uniformly. Move the cooling front completely through and out of the grain mass and maintain low grain temperatures as long as possible during storage. It is not necessary to rewarm dry grain with fans during the spring and summer. The recommended moisture levels for various grains for short term storage and long term storage are summarized in Table 2.


Check stored grain regularly for temperature, moisture, insects and molds. Inspect stored grain every 7 to 14 days when either outdoor or grain temperatures are greater than about 50°F, but if the grain is in good condition and has been cooled to less than 30°F, you can increase the inspection interval to once every three to four weeks during cold weather. Check for insects by screening them from the grain, examining kernels for damage, looking for webbing, detecting off-odors, or monitoring grain temperatures. Insect infestations can raise grain temperatures to as high as 110°F. During the summer and fall, insect infestations are usually near the surface of the grain. During cold weather stored grain insects will congregate at the center and lower portions of the grain mass and may escape detection until extensive heating has developed.

Table 1. Insecticides registered for use in Minnesota to protect stored grain from insects. Updated September, 20141.

Site Crop Insecticide Comments
Residual bin sprays:

Clean, sweep, and spray all bins before harvest.

Note: Do not add grain to a treated bin for at least 24 hours or until wall have dried thoroughly.

Barley, corn, oats, rye, wheat Centynal
Controls wide range of pests. Treat inside of clean bins prior to storing grain. Can be used in outdoor perimeter applications around bins and on surrounding vegetation.
All grains Diacon IGR
Diacon-D IGR
Active ingredient is an insect growth regulator. It prevents development of larvae into adults. Adult insects are not controlled. Can be tank mixed with an adulticide.
All grains Dryacide 100
(diatomaceous earth)
Distribute dust to provide an even coating on interior surfaces. Can also be applied as a slurry.
Barley, corn, oats, rye, wheat Malathion 5
Malathion 57 EC
May not provide control of Indianmeal moth. Read label for directions for use. Do not apply directly to grain.
All grains Tempo
Check product label for rates. Do not apply directly to grain.
Barley, oats, sorghum, wheat Storcide II
(chlorpyrifos-methyl + deltamethrin)
Storcide II combines the active ingredients of Centynal (deltamethrin) with chlorpyrifos-methyl. It may only be applied to empty storage bins using automated equipment.
Grain protectant:

All grain is treated as it is augured into the bin

Corn, sorghum Actellic 5E
No food or feed restrictions. Lesser grain borer is not listed as a target pest. One application per crop only.
Barley, corn, oats, rye, wheat Centynal
Controls wide range of pests. Soybeans not on label.
All grains, any food commodity Diacon IGR
Diacon-D IGR
Active ingredient is an insect growth regulator. It prevents development of larvae into adults. Adult insects are not controlled. Can be tank mixed with an adulticide.
Barley, oats, sorghum, wheat Storcide II
(chlorpyrifos-methyl + deltamethrin)
Storcide II combines the active ingredients of Centynal (deltamethrin) with chlorpyrifos-methyl. Apply as grain enters storage. Can be used for treating seeds. Not labelled for corn.
Layer treatment when bin is being filled

Alternative to treating entire grain mass.

Grains, soybean, sunflower Dipel DF
(Bacillus thuringiensis ssp. kurstaki
For Indianmeal moth larvae only. Apply into grain stream as last 4-inch layer is augured into the bin. Will not control Indianmeal moth adults or beetles.
All grains Dryacide 100
(diatomaceous earth)
Treat top 2 to 3 feet as it is augured into the bin
Top-dressed surface treatment:

Apply insecticide to surface after grain is binned.

Note: To ensure maximum control, remove all surface crusting and webbing prior to treatment.

All grains, any food commodity Diacon IGR
Diacon-D IGR
Active ingredient is an insect growth regulator. It prevents development of larvae into adults. Adult insects are not controlled. Can be tank mixed with an adulticide.
Grains, soybean, sunflower Dipel DF
(Bacillus thuringiensis ssp. kurstaki
For Indianmeal moth larvae only. As a surface treatment, apply 1/2 lb. of DiPel in 5-10 gal. of water per 500 sq. ft. of grain surface. Mix into top 4 inches.
All grains Dryacide 100
(diatomaceous earth)
Apply 4 lb. per 1000 sq. ft. Treat only the top 1 to 2 feet of the grain mass.
1Sources: Minnesota Department of Agriculture Product Registration list; CDMS label search (www.cdms.net); Greenbook (www.greenbook.net).
Information subject to change. Read insecticide label for final authority.

Table 2. Maximum recommended moisture content for grain
storage with aeration.
(percent wet basis for clean, aerated grain crops).

—————-Storage time—————-
Crop Up to 6 months More than 6 months
Corn 15 13
Soybeans 13 11
Canola 15 13
Edible beans 15 13
Small grains 14 13
Sunflower (oil) 10 8
Source: Grain Storage Tips: Factors and formulas for crop drying, storage and handling, University of Minnesota, 2002.

(Source – http://www.extension.umn.edu/agriculture/corn/harvest/managing-stored-grain/#aeration)


  1. This was a great insight into what this industry is like. I’m sure there are people that aren’t happy about insecticides being applied to the grain, but I would rather have that, than no grain to eat. Insects can easily find their way into any kind of grain product.

  2. I love the rule-of-thumb to make sure you can’t tell what has been previously in the grain bin. Does ensuring that the grain bin is sanitary make it so that you don’t have to repair it as much as well? What is the best way to repair a leak if you have a metal grain bin?

Leave a Reply

Your email address will not be published. Required fields are marked *